|
Flat Panels
Rear-Projection TV Front Projectors Receivers HT in a Box Speakers Recently Added
Video Displays
All In One HT
Speakers
Sources
Electronics
Other Hardware
Custom Install
Software Hook Me Up HT Talks To Boot Camp Advice From the Experts Ask Home Theater Shane Buettner Mark Fleischmann Audio/Video News CES 2010 CEDIA 2009 CES 2009 CEDIA 2008 CES 2008 CEDIA 2007 HE 2007 CES 2007 CEDIA 2006 AV Links HT Galleries A/V Glossary Contact Us Customer Service New Subscription Digital HT Renew Give a Gift Sub Services Flatscreen TVs LCD TVs Plasma TVs HDTV AV Receivers Home Theater in a Box Digital Projectors DLP Projectors Video Projectors Surround Sound Dolby 5.1 |
LTB Audio LTB-AC3 5.1 Surround Sound Headphone System
After more years writing about sound technology than I care to count, I've had two revelations of note: A full 5.1-channel speaker system is too much for some people, while, for many of those same folks, traditional stereo just isn't enough. With content—movies and games—growing ever more sophisticated, we need adequate gear on which to enjoy it. However, not everyone has the space, the budget, or even the basic technical know-how to wire five speakers and a subwoofer.
Listen Up
A PS2 console can connect directly to the rear of the outboard amp unit via optical cable, and a DVD player connects via optical or coaxial cable (both are included). To connect an Xbox console, you'll need an upgraded A/V cable with an optical port or, even better, an A/V cable that outputs via coaxial (also included). There's also an analog stereo input for sources such as TV, CD players, etc., which are then upmixed to a simulated surround format. The amp requires AC power, and the headphones plug into one of the two jacks on the front of the amp. This proprietary plug is rather unusual. It combines three separate contact points along the 3.5-millimeter miniplug, and another in the RCA-type base carries the discrete information from the Dolby Digital decoder to the multiple independent speaker chambers inside the earcups.
Considering how well these LTB-AC3 headphones work with portable DVD players, a battery-operated model would be a welcome addition. Since LTB Audio manufactures other 2.4-gigahertz products, perhaps wireless 5.1 is also a possibility.
Highlights
Article Continues: At A Glance & Ratings »
|
|
||||||||||||||||||||||||||||||||


For some people, Listen To Believe (LTB) Audio's new LTB-AC3 "true 5.1" headphones might be the key. Targeted first and foremost at the high-end gaming market, the system's decoder/amplifier module offers a digital optical audio input to mate with Xbox or PlayStation 2. There's also a coaxial digital connection for just about any DVD player, with a hard selector switch in between. The padded, over-the-ear headphones park a total of six "independent speaker chambers" right where you need them, three on each side: left and right versions of front, surround, and center channels. Although the LTB-AC3 doesn't include a dedicated microsubwoofer, it piggybacks bass reproduction into the left and right main drivers. LTB's SafeBass technology decreases low-frequency output and mixes it down into the left and right channels to protect the listener's hearing. LTB Audio positioned and angled each chamber to work with the shape of the ear to yield an effect similar to that of a properly configured 5.1-channel speaker system. (See the cutaway illustration on the following page.) It's pretty convenient, especially with the tiny remote control that raises and lowers the volume for two sets of headphones individually or mutes the system.
Highs and Lows

