Flat Panels

Unit-to-unit sample variations, the viewing environment, and the source might render these settings less than optimum. We strongly recommend that you confirm the results on your sample by using a good display setup DVD to get as close as possible to an optimum picture short of a full calibration. The latter is best left to a trained and properly equipped technician, such as those certified by the Imaging Science Foundation (ISF) or THX. For reasons clearly discussed in the text, the red, green, and blue white balance settings are not shown here.

AV Mode: User
OPC: Off
Backlight: -5
Contrast: +28
Brightness: +2
Color: -4
Tint: +6
Sharpness: 0 (centered)
Advanced
C.M.S. Saturation: All 0 (centered)

• C.M.S. Hue: All 0 (centered)

• Active Contrast: Off
• Fine Motion Enhanced: Off
• I/P Setting (Slow—or as needed)
• Film Mode: On (interlaced only)
• Digital Noise Reduction: Off