 Site Links
Flat Panels
Rear-Projection TV Front Projectors Receivers HT in a Box Speakers Recently Added
Video Displays
All In One HT
Speakers
Sources
Electronics
Other Hardware
Custom Install
Software Hook Me Up HT Talks To Boot Camp Advice From the Experts Ask Home Theater Shane Buettner Mark Fleischmann Audio/Video News CEDIA 2009 CES 2009 CEDIA 2008 CES 2008 CEDIA 2007 HE 2007 CES 2007 CEDIA 2006 AV Links HT Galleries A/V Glossary Contact Us Customer Service New Subscription Digital HT Renew Give a Gift Sub Services Flatscreen TVs LCD TVs Plasma TVs HDTV AV Receivers Home Theater in a Box Digital Projectors DLP Projectors Video Projectors Surround Sound Dolby 5.1 |
 |
|
|
Totem Acoustic Sttaf Loudspeakers, Outlaw Audio LFM-2 Subwoofer, and Outlaw Audio RR2150 Stereo Receiver:
HT Labs Measures: Outlaw Audio RR2150 Stereo Receiver
Both channels driven continuously into 8-ohm loads:
Analog frequency response with Tone Off:
Analog frequency response with Tone On:
This graph shows that the RR2150's left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1% distortion at 125.1 watts and 1% distortion at 145.9 watts. Into 4 ohms, the amplifier reaches 0.1% distortion at 220.7 watts and 1% distortion at 243.7 watts. THD+N from the amplifier was less than 0.011% at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –74.77 dB left to right and –75.39 dB right to left. The signal-to-noise ratio with 2.83 volts driving an 8-ohm load from 10 Hz to 24 kHz with "A" weighting was –99.42 dBrA.—MJP
Article Continues: Need a Display? »
|
|
|
|
 Sponsored Technology Center
|
||||||||||||||||||||||||||||||||||||
